CAB M4, Руководство оператора

Страница: 43 / 132

43 cab Produkttechnik GmbH & Co KG
M4
4. Swing the media retainer ( 11 ) downwards until it touches the media hub
( 9 ). Push the media retainer against the supply role until it rests against
the label media. Tighten the knurled screw ( 10 ).
5. Raise the printhead assembly ( 2 ) by rotating the lever ( 7 ) clockwise until it
stops.
6. Slide the media guide ring ( 6 ) outward, allowing enough clearance for the
label stock's width when loaded.
7. Slide the media strip underneath the guide axle ( 5 ) and through the
adjustable photocell assembly ( 3 ) until it comes out of the front of the
printer. If you are using labels that are wound-in, please make sure that
you slide the media strip over the internal rewind hub ( 13 ).
In figure 7d the feed path for labels wound-out is represented by a solid
line, and the feed path for wound-in labels is represented by a broken line.
7. Media Loading
Fig. 7d Feed path in Tear-off Mode
8. Slide the media guide ring ( 6 ) inward until it lightly touches the side of the
media strip.
13