CAB M4 Скачать руководство пользователя страница 36

Страница: 36 / 132

cab Produkttechnik GmbH & Co KG

5. Installation

Windows 2000/XP

1. Turn on the computer.

2. Quit any open applications.

3. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM

drive.

4. From the Start Menu, select Settings, Printers, Add Printer.

5. The Add Printer Wizard box will appear. Click "Next".

6. Select "Local Printer". Click "Next".

7. Select "New Port".

8. Highlight "Standard TCP/IP Port". Click "New Port". Click "Next".

9. The "Add a Standard TCP/IP Port Wizard" will be started. Click "Next".

10. Enter the IP Address of the Printer. Note: the Port Name will automatically

be added. Click "Next".

11. Under "Additional Port Information" select "User defined". Click "Settings".

12. Choose between "Raw" und "LPR". If you selected "Raw" enter the port

address (e.g. 9100) assigned in the printer. If you selected "LPR" enter the

queue name "lp".

Click "OK" and in the next windows "Next" and "Finish".

13. Click "Have disk". Under "Copy manufacturers files from:", type

D:\WINDRV\9X2000XP

" (where D is the letter of your CD-ROM drive).

Click "OK".

14. Double-click on the model that matches your printer. Click "Next" to

proceed.

15. Change the printers name if necessary, and decide if the new printer

should be the standard printer. Click "Next".

16. In the next screen, choose not to share the printer.

17. Select if you want to print a test page. Click "Next".

18. Click "Finish.

19. If the message "Digital signature not found" (Windows 2000) or "Windows

logo test failed" (Windows XP) appear, click "Yes" (Windows 2000) or

"Continue" (Windows XP) to continue with the installation.

20. In the folder "Printers" the icon of the new printer appears. The installation

has finished.

Содержание M4





































































































































Результаты поиска

Содержание M4

Отзывы:

CAB M4, Руководство оператора, Страница: 36 / 132

Результаты поиска

Содержание M4

Отзывы: