CAB M4 Скачать руководство пользователя страница 32

Страница: 32 / 132

cab Produkttechnik GmbH & Co KG

5. Turn on the printer. Windows displays, that a new hardware was found and

that the "Found New Hardware Wizard" installs a driver for that device.

Click "Next".

6. The message "Search for a suitable driver for my device appears. Click

"Next.

7. Click the boxes as needed so that there is a check mark next to "Specify a

location:".

8. Under "Specify a location:", type "

D:\WINDRV\9X2000XP

" (where D is the

letter of your CD-ROM drive). Click "OK". The driver will be installed

automatically.

9. If the message "Digital signature not found" appears, click "Yes" to

continue with the installation.

10. The hardware wizard asks you to enter the source for the file

"cabsetup.exe".

Under "Specify a location:", type "

D:\WINDRV\9X2000XP

". Click "Open"

and after that "OK".

11. The next window asks you to enter the source for a next file

e.g."cabm4200.dat" or "cabm4300.dat".

Under "Specify a location:", type "

D:\WINDRV\9X2000XP

". Click "OK".

12. In the folder "Printers" the icon of the new printer appears. The installation

has finished.

Windows XP

1. Make sure that the printer is connected to an USB interface and the printer

is switched off.

2. Turn on the computer.

3. Quit any open applications.

4. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM

drive.

5. Turn on the printer.The "Found New Hardware Wizard" installs

automatically a driver for the USB printer support.

6. The "Found New Hardware Wizard" appears. Under "Optional search

locations" click the locations as needed so that there is a check mark next

to "Specify a location:". Click "Next".

7. Select "Do not search, but select the driver by myself". Click "Next".

8. If the windows "Hardware Type" appears, select "Printer" and click "Next".

9. Click on "Media" and type "

D:\WINDRV\9X2000XP

" (where D is the letter

of your CD-ROM drive). Click "Next".

10. Select "CAB M4 203DPI" or "CAB M4 300DPI" from the printers list and

click "Next".

11. If "Windows logo test failed" appears, click "Continue" to continue with the

installation.

12. Click in the next window on "Finish".

13. In the folder "Printers" the icon of the new printer appears. The installation

has finished.

5. Installation

Содержание M4





































































































































Результаты поиска

Содержание M4

Отзывы:

CAB M4, Руководство оператора, Страница: 32 / 132

Результаты поиска

Содержание M4

Отзывы: