CAB M4 страница 100 Скачать руководство пользователя

Страница: 100 / 132

100

cab Produkttechnik GmbH & Co KG

**********************************************************************************************************

Permission to use, copy, modify, and distribute this software and its documentation for any

purpose and without fee is hereby granted, provided that the above copyright notice appear

in all copies and that both that copyright notice and this permission notice appear in

supporting documentation, and that the name of CMU not be used in advertising or publicity

pertaining to distribution of the software without specific, written prior permission.

CMU DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING

ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

SHALL CMU BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA

OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

**********************************************************************************************************

The modifications are also copyright as outlined below:

**********************************************************************************************************

Permission to use, copy, modify, and distribute this software and its documentation for any

purpose and without fee is hereby granted, provided that that the name Glenn Waters not

be used in advertising or publicity pertaining to distribution of the software without specific,

written prior permission.

Glenn Waters DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,

INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO

EVENT SHALL Glenn Waters BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM

LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,

NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

**********************************************************************************************************

Glenn Waters

[email protected]

10. Network Printer Functions

Содержание M4





































































































































Результаты поиска

Содержание M4

Отзывы:

Похожие инструкции для M4

Бренды по названию

Популярные бренды

CAB M4, Руководство оператора

Результаты поиска

Содержание M4

Отзывы:

Похожие инструкции для M4

Бренды по названию

Популярные бренды