CAB M4, Руководство оператора

Страница: 35 / 132

35 cab Produkttechnik GmbH & Co KG
M4 5. Installation
Ethernet Interface
NOTICE !
M4 supports the network print protocols LPD and RAW-IP.
Under the Windows 95/98/ME operating system, there is no built-in
support for RAW-IP and LPD. Under Windows NT4.0 RAW-IP is not
supported. But there are Third-Party solutions for using TCP/IP with the
printer. It is necessary to install special tools in order to use these
printing protocols. Information about these tools are available from cab.
Windows NT 4.0 (LPD only)
1. Turn on the computer.
2. Quit any open applications.
3. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM
drive.
4. From the Start Menu, select Settings, Printers, Add Printer.
5. The Add Printer Wizard box will appear. Select "My Computer". Click
"Next".
6. Select "Add Port".
7. From the menu, select "LPR Port", and click "New Port".
8. In "Name or address of server providing lpd", enter the IP address of the
printer.
9. In "Name of printer or print queue on that server", enter "lp". Click "OK"
and "Close".
10. Select the new printer port from the list and click "Next".
11. Click "Have disk". Under "Copy manufacturers files from:", type
" D:\WINDRV\NT40 " (where D is the letter of your CD-ROM drive). Click
"OK".
12. Double-click on the model that matches your printer. Click "Next" to
proceed.
13. Change the printers name if necessary, and decide if the new printer
should be the standard printer. Click "Next".
14. In the next screen, choose not to share the printer.
15. Select if you want to print a test page. Click "Finish“.
16. In the folder "Printers" the icon of the new printer appears. The installation
has finished.