BullFrog 2001 Portable Spas, Руководство пользователя

Страница: 31 / 42

Page 31 Bullfrog Spas Owner’s Manual
CLEANING YOUR FILTER
Cleaning the Filter Basket:
1. Put the spa in "Standby Mode". This will prevent the
pump from activating while cleaning the basket. (See
"Standby Mode" under "OPERATION" in this Owner's
Manual.)
2. Remove skimmer face-plate and basket (Fig. V & W).
3. Clean the basket. Avoid hitting basket against
objects to knock debris loose as this can break
basket.
4. Reinstall skimmer face-plate and basket.
5. Press any button on the control pad to reset the
control system.
Cleaning the Filter Cartridge:
It is recommended that your Filter Cartridge(s) be
cleaned every 3 to 6 weeks or as needed. Replace the
Filter Cartridge(s) approximately every two years or
when necessary. To maintain warranty protection, use
only Bullfrog Filter Cartridge replacements.
1. Put the spa in "Standby Mode". This will prevent the
pump from activating while cleaning the cartridge.
(See “Standby Mode” under "OPERATION" in this
Owner's Manual.)
2. Remove skimmer face-plate and basket.
3. Grasp cartridge(s) and lift out. With a garden hose
and nozzle or other high pressure device, hose
cartridge(s) clean with jet stream of water. Work top to
bottom on each pleat. To remove collected suntan
lotions and body oils that hosing will not remove;
soak cartridge(s) in warm water with a FILTER
CLEANER or detergent added. To remove calcium
deposits (a white chalky material) soak cartridge(s) in
a one part muriatic acid to ten parts water solution.
USE A PLASTIC CONTAINER ONLY. Calcium deposits
indicate a high spa pH, which should be corrected.
5. CAUTION: Using a brush to clean a cartridge could
damage it. Commercially available cartridge cleaners
may be used and can be obtained from your
authorized Bullfrog Portable Spa Dealer.
6. Reinstall cartridge(s), basket and skimmer face-
plate.
7. Press any button on the control pad to reset the
control system.
(Figure V) Skimmer, Basket & Filter Location
(Figure W) Skimmer, Basket & Filter Assembly