BullFrog 2001 Portable Spas, Руководство пользователя

Страница: 12 / 42

Page 12 Bullfrog Spas Owner’s Manual
INITIAL START-UP
Important: Bullfrog Spas come with either an Standard,
Deluxe , or Limited Control System. Refer only to the
Control System that applies to your spa.
STANDARD CONTROL SYSTEM:
When your spa is first activated, it will go into Priming
mode, indicated by “
Pr ” on the display. The Priming
mode will last for less than 5 minutes and then the spa
will begin normal operation in Standard Mode. By
default, the spa will begin to heat until it reaches the
start-up temperature of 100°F.
DELUXE CONTROL SYSTEM:
When your spa is first activated, it will go into Priming
mode, indicated by “
Pr ” on the display. The Priming
mode will last for less than 5 minutes and then the spa
will begin normal operation in Standard Mode. For the
first one minute, “
—F ” will appear on the display while
the system is sensing the water temperature. By default,
the spa will begin to heat until it reaches the start-up
temperature of 100°F.
Note: The Priming Mode can be accelerated by pressing
the “Jets 1” button and then the “Warm or Cool” button.
LIMITED CONTROL SYSTEM:
When your spa is first actuated, it will go into Priming
mode. Please see the M-7 Installation Instruction Manual
for complete instructions on Power-up and Pump
Priming. The Priming mode will last for less than 5
minutes and then the spa will begin to heat the spa and
maintain the water temperature in the Standard mode