BullFrog 2001 Portable Spas, Руководство пользователя

Страница: 23 / 42

Page 23 Bullfrog Spas Owner’s Manual
Jet Paks ™
Depending on the model, your Bullfrog Spa is equipped
with either one, two, or all three of the following JetPak
types:
•
Bucket JetPaks
•
Recliner JetPaks
•
Lounger JetPaks
The difference in these three types of JetPaks is the
contour of the backrest. Because the Jet-Pak contours
are different, they can only be interchanged with
JetPaks of their same type (Example: You can
interchange a Bucket Seat JetPak with any other Bucket
Seat JetPak, but you cannot interchange it with either a
Recliner or a Lounger JetPak.
To identify a type of JetPak, locate the JetPak
Identification Number found on the back side of the
JetPak (example: B7-22-3). This number provides the
following information:
•
The Type of JetPak (B=Bucket, R=Recliner, &
L=Lounger)
•
The Style of JetPak (7=Style Number 7)
•
The Water Flow-Rate of the JetPak (22=22 Gallons
Per Minute)
•
The Number of Jets (3=3 Jets)
INTERCHANGING JETPAKS:
1. Put the spa in "Standby Mode". This will prevent the
pump(s) from activating while interchanging JetPaks.
(See "Standby Mode" under "OPERATION" in this
Manual.)
2. Remove the headrest.
3. Using your hands, remove the SnapCap (top
mounting plate) by lifting it upward.
4. Push the JetPak forward until you have enough room
to reach the two PVC water unions (Fig. P).
5. Using your hands, loosen the 2 PVC unions (Fig. Q).
6. After disconnecting the air line union, pull the
manifold out from between the two water unions and
then remove the JetPak from the JetPod (Fig P).
7. Exchange the JetPak with another JetPak of the same
type.
8. Reattach the JetPaks in the same manner as above.
IMPORTANT WARNING: Spa models with 2 pumps have
2 different jet zones. These JetZones are divided by a
JetZone Divider (see “JetZones in this manual). Never
operate the spa without the JetZone Divider in place.
Doing so, will cause serious damage to your pump(s).
Also, interchanging JetPaks from one JetZone (see
“JetZones” in this manual) to another may result in
improper water flows to one or more JetPaks. If you
have questions or problems, please consult your
authorized Bullfrog Portable Spa Dealer.
(Figure Q) Jet Pak Unions
(Figure P) Removing a Jet Pak