Bull NovaScale R630 E1, Руководство по установке, Страница: 91 / 146

4-41
IMPORTANT:
If you set RDR on the disk that
includes a system partition or a
partition that cannot be
unmounted, the message on the
right is displayed. Click [Yes].
The system is restarted after 2
minutes. After it is restarted,
perform the steps 7and later.
7.
Insert the disk to set dual configuration into the slot 1 of PCI module 1, and execute
the procedure 2.
IMPORTANT:
– If a HDD is already mounted, this procedure is not necessary. Proceed to the
procedure 8.
– A popup window may come up when you inserted or initialized the disk;
however, you do not need to restart the system. Select [No] to exit the popup
window.
– As to the disk to be inserted, use a new disk or a physically formatted disk with
the same capacity as the synchronization source disk. If you use other disks,
dual configuration is not set normally.
*
As for physical format, refer to “SAS BIOS – Adaptec SAS/SATA – Configuration
Utility” in Chapter 4, “System Configuration” in the separate volume of the User’s
Guide, and perform Format Disk with Disk Utilities
To perform “Low-Level Format,” on the BIOS setup utility, click [Server],
[Monitoring Configuration] and set [Option ROM Scan Monitoring] to [Disabled].
For how to configure the settings, see “System BIOS – SETUP –” in Chapter 4,
“System Configuration” in the separate volume of the User’s Guide.