Bull NovaScale R630 E1 Скачать руководство пользователя страница 105

Страница: 105 / 146

Error! Style not defined.

4-55

Change the value set for [Initial Size] in the [Paging file size for selected drive] box to the
[Recommended] value or more, and then click [Set].

IMPORTANT:

Be sure to create the file in the size more than [Recommended] value in the OS

partition. If a value smaller than the [Recommended] value is set for [Initial Size] of
the paging file, accurate debug information (memory dump) may not be collected.

To be prepared for failure, it is recommended to press the dump button to see if the

memory dump can be collected normally beforehand.

If the memory has been expanded, re-set the paging file according to the memory

size.

Click [OK].

A message is displayed asking you to restart the system depending on the changed settings.
Restart the system according to the messages.

Содержание NovaScale R630 E1



















































































































































Результаты поиска

Содержание NovaScale R630 E1

Отзывы:

Bull NovaScale R630 E1, Руководство по установке, Страница: 105 / 146

Результаты поиска

Содержание NovaScale R630 E1

Отзывы: