Bull NovaScale R630 E1, Руководство по установке, Страница: 19 / 146

1-5
Installation, Relocation, Storage and Connection
CAUTION
Do not install the server in an unsuitable place.
Install the server in such a place as specified in this User's Guide. Avoid the
following locations. There is a risk of a fire.
„
a dusty place
„
a humid place located near a boiler, etc
„
a place exposed to direct sunlight
„ an unstable place
Do not use or store this product in a corrosive environment.
Avoid the usage or storage of this product in an environment which may be
exposed to corrosive gases, such as those including but not limited to :
sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia and/or ozone.
Avoid installing the Fault Tolerant series in a dusty environment or one that may be
exposed to corrosive materials such as sodium chloride and/or sulfur.
Avoid installing this product in an environment that may have excessive metal
flakes or conductive particles in the air.
Such environments may cause corrosion or short circuits within this product,
resulting in not only damage to this product, but may even lead to be a fire hazard.
If there are any concerns regarding the environment at the planned site of
installation or storage, please contact your sales agent.
Do not use any non-designated interface cable.
Use only interface cables designated by the manufacturer; identify which
component or connector to attach beforehand. If you use a wrong cable or make a
wrong connection, there is a risk of short-circuit that could lead to a fire.
You also have to observe the following prohibitions about handling and connecting
interface cables:
„
Do not use any damaged cable connector.
„
Do not step on the cable.
„
Do not place any object on the cable.
„
Do not use the server with loose cable connections.
„
Do not use damaged cables.