Bull NovaScale R630 E1, Руководство по установке, Страница: 68 / 146

4-18
Setup Procedures
Express Setup precedes the setup by selecting or inputting several parameters on the wizard.
You can also save the parameters to a floppy disk as a parameters file.
CHECK:
To execute Express Setup with a parameter file, one empty 1.44MB formatted floppy disk
is required. Prepare an empty floppy disk in advance.
When you reinstall OS, you can skip entering the parameter in the Wizard form, by reading
the parameter file that has been saved.
IMPORTANT:
In case of changing the system configuration, update the system (page 6-8).
1.
Turn the power of peripheral device on, and then turn on the server.
2.
Insert the EXPRESSBUILDER DVD into the optical disk drive of the server.
3.
Press the RESET switch or press
Ctrl
,
Alt
, and
Delete
to reboot from the
EXPRESSBUILDER. (You may also turn off and then on again to reboot
the server.)
The system will boot from
the DVD-ROM and
EXPRESSBUILDER starts.
Select “OS installation ***
default ***” from the boot
selection menu.
(If you do not hit any key,
“OS installation” is selected
automatically.)
The Top menu will appear.
4.
Select [Perform the Express
setup] from the Top Menu,
click [Next].