Bull NovaScale R630 E1, Руководство по установке, Страница: 131 / 146

6-7
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) to run on your computer.
- To set up Windows now, press ENTER.
- To repair a Windows installation using
- Recovery Console, press R.
- To quit Setup without installing Windows, press F3.
4.
When you start up Recovery Console from Windows Server 2003 CD-ROM, the following message
appears. Press the
R
key to boot Recovery Console.
IMPORTANT:
„
The message shown above does not appear when you have started up the Recovery Console
installed on the system.
5.
Follow the messages on the screen to start up the Recovery Console.
IMPORTANT:
„ When you restored a damaged file using the Recovery Console, update the system
described in the next section.
„
If you run the system without restoring files, enable the configuration for OS Boot
Monitoring function. When necessary for system operation, select [Server] - [Monitoring
Configuration] - [OS Boot Monitoring] and set appropriate time. See “Step 13: Enable OS
Boot Monitoring Function” (page 4-40) for details.
„ To write data to a dynamic disk, settings described in “Cautions for using the Windows
Server 2003 Recovery Console” in “System Repair” need to be configured in advance. For
details, see “Cautions for using the Windows Server 2003 Recovery Console” in “System
Repair.”