Bull NovaScale R630 E1, Руководство по установке, Страница: 22 / 146

1-8
CAUTION
Be careful not to hurt your fingers.
Exercise great care not to hurt your fingers on the rail when you mount/dismount the
server into/from the rack.
Carry or install the server by more than 3 people.
To avoid a risk of injuries, users should not attempt to carry or install the server into a
rack. Installation should be performed by trained maintenance personnel.
Do not install the server in such a manner that its weight is imposed on a single place.
To distribute the weight, use stabilizers or attach two or more racks. Unstable rack
may fall down to cause injuries.
Do not assemble parts alone.
It takes at least two people to mount doors and trays to a rack. If you handle them
alone, you may drop some parts to cause a breakage or injuries.
Do not pull a device out of the rack if the rack is unstable.
Before pulling out a device, make sure that the rack is fixed (by stabilizers or
quake-resistant engineering).
Do not leave more than one device pulled out from the rack.
If you pull out more than one device, the rack may fall down. You can only pull out one
device at a time.
Do not install excessive wiring.
To prevent burns, fires, and damage to the server, make sure that the rated load of the
power branch circuit is not exceeded. For more information on installation and wiring
of power-related facilities, contact your electrician or local power company.
Do not pull out a device during operation.
Do not pull out or remove a device while it is running. There is a risk of malfunction
and a device may be detached from a rack to cause injuries.