Bull NovaScale R630 E1, Руководство по установке, Страница: 48 / 146

3-20
IMPORTANT:
Connection of optional devices
„
In the case of standard configuration, you need to complete setup of the operating
system before mounting optional PCI cards or hard disks that you purchased
separately.
„
If a Fiber Channel Controller is mounted, be sure to connect cables to the FC array unit
before going on to the next step.
USB floppy disk
drive
USB connection
modem
Keyboard
(via keyboard hub to
USB mouse)
Display
Back of
the device
Hub
(multiport repeater)
To a 1000Mbps network
Serial Interface
Connect the device with the
serial interface
(This cannot be used since it is
for maintenance.)
LAN port
(VTM)
(Connect
only when using
the ft Remote
Management
Card)
AFTER every peripheral device is
connected, insert the power cord
into a socket. the outlet.