Bull NovaScale R630 E1, Руководство по установке, Страница: 128 / 146

6-4
Preparation
You need a support disk, “Windows Server 2003 OEM-DISK for EXPRESSBUILDER” to start up the Recovery
Console. Have “Windows Server 2003 OEM-DISK for EXPRESSBUILDER” ready before starting the Recovery
Console.
If you do not have a computer that runs Windows Server 2003 or Windows XP/Vista.
Follow the steps below to create a “Windows Server 2003 OEM-DISK for EXPRESSBUILDER”:
1. Prepare a 3.5-inch floppy disk.
2. Power on the peripherals and then Fault Tolerant Server series.
3.
Disable the configuration for OS Boot Monitoring function.
In the BIOS setup, select [Server] - [Monitoring Configuration] - [OS Boot Monitoring] and choose
“Disabled.” See “Step 3: Disable OS Boot Monitoring Function” (page 4-9) for details.
4.
Insert the EXPRESSBUILDER DVD into the drive of the server.
5. Then, reset (pressing Ctrl + Alt + Delete ) or power off/on Fault Tolerant Server series to reboot it.
The system will start up from the EXPRESSBUILDER DVD.
6.
Select [OS installation *** default ***] when [Boot Selection] menu is displayed. (Even if you enter
nothing, it automatically proceeds to the next screen.)
7.
Select [Create OEM-Disk for Windows] and click [Next].
8. Select [Create a “Windows Server 2003 OEM-DISK for EXPRESSBUILDER”] or [Create a “Windows
Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER”] and click [Perform] depending on the OS
of your choice.
9.
Set the floppy disk according to the direction displayed on the screen. An OS-specific [OEM-DISK] will
be created. Write protect the floppy disk created, put on a label and store in a safe place.
IMPORTANT:
Enable the configuration for OS Boot Monitoring function to deploy the system without performing the system repair
which uses the Recovery Console. In the BIOS setup, select [Server] - [Monitoring Configuration] - [OS Boot
Monitoring] and set appropriate time. See “Step 13: Enable OS Boot Monitoring Function” (page 4-40) for details.
If you have a computer that runs Windows Server 2003 or Windows 2000/XP/NT.
You can also create a “Windows Server 2003 OEM-DISK for EXPRESSBUILDER” by the steps below:
1. Prepare a 3.5-inch floppy disk.
2. Insert the EXPRESSBUILDER DVD into the drive of a computer that runs Windows Server 2003 or Windows
XP/Vista.
3. The menu screen starts up. Click [Create drivers disk] and select [OEM-Disk for Windows Server2003] or
[OEM-Disk for Windows Server 2003 x64 Edition] depending on the OS of your choice.
4. Follow the instructions on the screen to insert the floppy disk.
An OS-specific [OEM Disk] will be created. Write protect the floppy disk, put on a label and keep it in a safe
place.