Bull Cedoc Novascale R422, Инструкция по установке и эксплуатации

Страница: 55 / 134

Advanced Chassis Setup
6-1
Chapter 6 Advanced Chassis Setup
This chapter covers the steps required to install components and perform maintenance on
the NovaScale R422/422-INF (CSE-808T-980B) chassis. For component installation, follow
the steps in the order given to eliminate the most common problems encountered. If some
steps are unnecessary, skip ahead to the step that follows.
Tools Required
The only tool you will need to install components and perform maintenance is a Phillips
screwdriver.
6-1 Static-Sensitive Devices
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage
to any printed circuit boards (PCBs), it is important to handle them very carefully. The
following measures are generally suf fi cient to protect your equipment from ESD discharge.
Precautions
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing any board from its antistatic bag.
Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
Put the serverboard, add-on cards and peripherals back into their antistatic bags when
not in use.
For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and the
serverboard.
Unpacking
The serverboard is shipped in antistatic packaging to avoid static damage. When
unpacking the board, make sure the person handling it is static protected.
•
•
•
•
•
•