Bull Cedoc Novascale R422, Инструкция по установке и эксплуатации

Страница: 72 / 134

7-12
NovaScale R422 Installation and User's Guide
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio (Available when supported by the CPU)
The feature allows the user to set the internal frequency multiplier for the CPU. The options
are: Default , x12, x13, x14, x15, x16, x17 and x18.
Hyper-threading (Available when supported by the CPU)
Set to Enabled to use the Hyper-Threading Technology, which will result in increased CPU
performance. The options are Disabled and Enabled.
Core-Multi-Processing (Available when supported by the CPU)
Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's web
site for more information.) The options are Disabled and Enabled.
Machine Checking (Available when supported by the CPU)
Set to Enabled to activate the function of Machine Checking and allow the CPU to detect
and report hardware (machine) errors via a set of model-speci fi c registers (MSRs). The
options are Disabled and Enabled.
Thermal Management 2 (Available when supported by the CPU)
Set to Enabled to use Thermal Management 2 (TM2) which will lower CPU voltage and
frequency when the CPU temperature reaches a prede fi ned overheat threshold. Set to
Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking to be regulated via CPU
Internal Clock modulation when the CPU temperature reaches the overheat threshold.
C1 Enhanced Mode (Available when supported by the CPU)
Select Disable to disable the Standard C1 Halt State which will partially turn off the CPU
internal clocks to conserve energy and prevent system overheating when the OS is idle.
Select Enable to use the Enhanced C1 Halt State to lower the CPU clock frequency and the
supply voltage before turning off the clocks.
Execute Disable Bit (Available when supported by the CPU and the OS)
Set to Enabled to enable Execute Disable Bit and allow the processor to classify areas
in memory where an application code can be executed and where it cannot, and thus
preventing a worm or a virus from inserting and creating a fl ood of codes to overwhelm
the processor or damage the system during an attack.
The options are Disabled and Enabled.
NOTE
:
For more information regarding hardware/software support for this function,
please refer to Intel's and Microsoft's web sites.