Bull Cedoc Novascale R422, Инструкция по установке и эксплуатации

Страница: 94 / 134

C-2
NovaScale R422 Installation and User's Guide
The Intel Matrix Storage
The Intel Matrix Storage, supported by the ESB2, allows the user to create RAID 0, RAID
1, RAID 10 and RAID 5 sets by using only six identical hard disk drives. The Intel Matrix
Storage Technology creates two partitions on each hard disk drive and generate a virtual
RAID 0, RAID 1, RAID 10 and RAID 5 sets. It also allows you the change the HDD partition
size without any data.
Con fi guring BIOS settings for SATA RAID Functions (Native Mode)
Press the <Del> key during system bootup to enter the BIOS Setup Utility.
Use the arrow keys to select the "
Exit
" Settings. Once in the " Exit " settings, Scroll down
to select " Load Optimized Default Settings " and press the <Enter> key. Select " OK " to
con fi rm the selection. Press the <Enter> key to load the default settings for the BIOS.
Use the arrow keys to select the " Mai n" section in BIOS.
Scroll down to " SATA Controller Mod e" and press the <Enter> key to select
" Enhanced "
Scroll down to " SATA RAID Enabled " and press <Enter>. Then, select " Enabled. "
Go to " Exit" . Select "Exit Saving Changes" from the " Exit " menu. Press the <Enter>
key to save the changes and exit the BIOS.
Once you've exited the BIOS Utility, the system will re-boot.
During the system boot-up, press the <Ctrl> and <I> keys simultaneously to run the Intel
RAID Con fi guration Utility when prompted by the following message: Press <Ctrl> <I>
for the Intel RAID Con fi guration Utility .
Using the Intel ESB2 SATA RAID Utility Program
Creating, Deleting and Resetting RAID Volumes
After the system exits from the BIOS Setup Utility, the system will automatically reboot.
The following screen appears after Power-On Self Test.
When you see the above screen, press the <Ctrl> and the <I> keys simultaneously to
have the main menu of the SATA RAID Utility appear:
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
NOTE
:
If it is the fi rst time powering on the system, we recommend you load the
Optimized Default Settings. If you have already done so, please skip to Step 3.
NOTE: The Intel RAID Con fi guration Utility is only available for systems with two or
more drives installed. The Intel RAID Utility screen will not display in systems
with one drive installed.
Due to each serverboard controlling two of the four SATA drives in the system,
the NovaScale R422/R422-INf only supports RAID levels 0 and 1
NOTE: All graphics and screen shots shown in the manual are for reference only. The
screen shots shown in the manual do not imply Bull's endorsement or non-
endorsement on any 3rd party's product. Your screens may or many not look
exactly the same as the graphics shown in this manual.