Bull Cedoc Novascale R422, Инструкция по установке и эксплуатации

Страница: 84 / 134

A-2
NovaScale R422 Installation and User's Guide
Check date and time settings
BIOS found date or time out of range and reset the Real-Time Clock. May require setting
legal date (1991-2099).
Previous boot incomplete - Default con fi guration used
Previous POST did not complete successfully. POST loads default values and offers to run
Setup. If the failure was caused by incorrect values and they are not corrected, the next
boot will likely fail. On systems with control of wait states, improper Setup settings can
also terminate POST and cause this error on the next boot. Run Setup and verify that the
waitstate con fi guration is correct. This error is cleared the next time the system is booted.
Memory Size found by POST differed from CMOS
Memory size found by POST differed from CMOS.
Diskette drive A error
Diskette drive B error
Drive A: or B: is present but fails the BIOS POST diskette tests. Check to see that the drive
is de fi ned with the proper diskette type in Setup and that the diskette drive is attached
correctly.
Incorrect Drive A type - run SETUP
Type of fl oppy drive A: not correctly identi fi ed in Setup.
Incorrect Drive B type - run SETUP
Type of fl oppy drive B: not correctly identi fi ed in Setup.
System cache error - Cache disabled
RAM cache failed and BIOS disabled the cache. On older boards, check the cache
jumpers. You may have to replace the cache. See your dealer. A disabled cache slows
system performance considerably.
CPU ID:
CPU socket number for Multi-Processor error.
EISA CMOS not writeable
ServerBIOS2 test error: Cannot write to EISA CMOS.
DMA Test Failed
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
Software NMI Failed
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).
Fail-Safe Timer NMI Failed
ServerBIOS2 test error: Fail-Safe Timer takes too long.
Device Address Con fl ict
Address con fl ict for speci fi ed device .