Bull Cedoc Novascale R422 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 134

Bull Cedoc Novascale R422 Скачать руководство пользователя страница 4

The following copyright notice protects this book under Copyright laws which prohibit such actions as, but not limited
to, copying, distributing, modifying, and making derivative works.

Copyright Bull SAS 2007

Printed in France

Suggestions and criticisms concerning the form, content, and presentation of this
book are invited. A form is provided at the end of this book for this purpose.

To order additional copies of this book or other Bull Technical Publications, you
are invited to use the Ordering Form also provided at the end of this book.

Trademarks and Acknowledgements

We acknowledge the right of proprietors of trademarks mentioned in this book.

Intel® and Xeon® are registered trademarks of Intel Corporation.

Windows® Compute Cluster Server 2003 and Microsoft® software are registered trademarks of Microsoft
Corporation.

UNIX® is a registered trademark in the United States of America and other countries licensed exclusively through
theOpen Group.

Linux® is a registered trademark of Linus Torvalds.

Supermicro® is a registered trademark of Supermicro Computer Limited.

Phoenix® is a registered trademark of Phoenix Technologies Ltd.

Novascale® Universal is a registered trademark of Bull S.A.S.

The information in this document is subject to change without notice. Bull will not be liable for errors
contained herein, or for incidental or consequential damages in connection with the use of this material.

«
...
2
3
4
5
6
...
»

Содержание Novascale R422







































































































































Отзывы:

Нет отзывов