Bull Cedoc Novascale R422, Инструкция по установке и эксплуатации

Страница: 109 / 134

Adaptec HostRAID Setup Guidelines
D-7
Creating Arrays
Before you create arrays, make sure that the disks for the array are connected and installed
in your system. Note that disks with no usable space, or disks that are un-initialized or
not formatted are shown in gray and cannot be used. (Note: It is recommended that you
con fi gure devices before you create arrays.)
From the main menu (shown on page D-4), select Create Array.
Select the disks for the new array and press Insert (as the screen shown below).
The arrays you have selected will appear on the Selected Drives dialog box on the
right (as shown below.)
Press Enter when both disks for the new array are selected. The Array Properties menu
displays.
1.
2.
3.
4.
NOTE:
To de-select any disk, highlight the disk and press Delete .