Bruker Daltonik GmbH
Instrument Layout
3.1.1 Instrument Controller
When the instrument is ready for operation the three green LED’s
Mains
,
Ready
, and
Access
illuminate green light as shown in Figure 3-2.
Figure 3-2 Control panel at the front of the instrument
1.
Load / Eject
: Moves the target in or out.
2.
Access:
a)
Permanently lit
: When either the tray is inside or outside the instrument in the
end position.
b)
OFF
: During the target moves in or out.
3.
In Progress
: Permanently lit as long as the docking procedure is in progress
(Target In/ Out).
4.
Error
:
a)
Permanently lit
: Malfunction, requires intervention of the user or a service
technician details are shown on the PC (flexControl).
b)
Flashing (combined with system error)
: Service mode or firmware update.
5.
Automode
: Permanent lit as long as AutoXecute is in progress. During this run
applying the related button cannot retract the target plate.
6.
Ready
:
a)
Permanently lit
: Ready for acquiring spectra, i.e. any interlock is closed; N
2
pressure is correct, sufficient vacuum, HV present, etc.
b)
OFF
: During the docking procedure.
7.
Warm up
:
ultraflex III User Manual, Version 1.0
20
