Bruker Daltonik GmbH
ultraflex III Mass Spectrometer
1.3.3 Operating Precautions
To protect yourself from harm and prevent system malfunction, observe the following
guidelines:
Before using the instrument, read all warnings presented in the beginning of this
manual.
•
•
•
•
•
•
Wear appropriate protective clothing, including safety glasses and gloves, when
preparing samples and solutions for use with this instrument.
Follow the correct safety procedure and the manufacturer's recommendations
when using solvents.
Clean the exterior surfaces of the instrument with a soft cloth dampened with a
mild detergent and water solution. Do not use abrasive cleaners or solvents.
Exercise caution when moving as the ultraflex III mass spectrometer weighs
550 kg / 1212 lb. Wear appropriate clothing and use appropriate tools when
carrying or moving the instrument.
The ultraflex III mass spectrometer contains a Class IV B pulsed ultraviolet
laser (100 µJ at 337 nm). Wear appropriate eye protection and never look
directly into the laser when any of the protective covers are removed. In
operation, laser light is directed onto the analysis chamber sample target. The
same interlocks that assure the analysis chamber vacuum integrity, also assure
that no laser light escapes through the target loading port. If the vacuum
system fails and system allows the load port to be opened, the laser cannot be
fired.
Caution:
When shipping or transporting the instrument it is critical that the target is in
the OUT position. Failure to do so will result in damage to the instrument.
Caution:
Do not restrict ventilation air intake at the rear of the machine or the exhaust
at the back of the machine.
To ensure proper operation check the ventilation air filter at the instrument
rear every three months and replace, if necessary, as explained in
chapter 5 Instrument Maintenance.
ultraflex III User Manual, Version 1.0
12
