Bruker Daltonik GmbH
©
Copyright 2006
Bruker Daltonik GmbH
All Rights Reserved.
Reproduction, adaptation,
or translation without prior
written permission is
prohibited, except as
allowed under the
copyright laws.
Document History
First edition: March 2004
Printed in Germany.
Warranty
The information contained
in this document is
subject to change without
notice.
Bruker Daltonik GmbH
makes no warranty of any
kind with regard to this
material, including, but not
limited to, the implied
warranties of
merchantability and
fitness for a particular
purpose.
Bruker Daltonik GmbH is
not liable for errors
contained herein or for
incidental or
consequential damages in
connection with the
furnishing, performance or
use of this material.
Bruker Daltonik GmbH
assumes no responsibility
for the use or reliability of
its software on equipment
that is not furnished by
Bruker Daltonik GmbH.
The names of actual
companies and products
mentioned herein may be
the trademarks of their
respective owners.
Safety Information
Safety Class
The ultraflex III with the
closed safety cover is a
Class I
Laser
product.
It has been designed and
tested in accordance with
IEC Publication 1010-1
Safety Requirements for
Electrical Equipment for
Measurement, Control,
and Laboratory Use.
WARNING
Connecting an instrument
to a power source that is
not equipped with a
protective earth contact
creates a shock hazard
for the operator and can
damage the instrument.
Likewise, interrupting the
protective conductor
inside or outside the
instrument or
disconnecting the
protective earth terminal
creates a shock hazard
for the operator and can
damage the instrument.
WARNING
The instrument must be
disconnected from its
power source before any
cover is removed or it is
opened!
WARNING
All connections of the
instrument must be used
in correct way. The
instrument should only
be used with the wires
and cables delivered
with the system or
otherwise provided by
the manufacturer.
Instrument
Identification
Each instrument is
identified by a serial
number. This number is
located on the rear of
the instrument.
When corresponding
with Bruker Daltonik
GmbH about your
instrument, be sure to
include the model name
and the full serial
number. Write the serial
number of the
instrument here for
reference:
Serial #
Part Numbers
In this manual, Bruker
Daltonik GmbH part
numbers are generally
listed in parentheses
after the name of the
part. A few tools and
supplies listed have no
part numbers and are
not available from
Bruker Daltonik GmbH.
Most of these can be
obtained from
laboratory supply
companies.
Manual part number:
PN # 245596
ultraflex III User Manual, Version 1.0
ii
