Brother GTX600NB, Инструкция по эксплуатации

Страница: 275 / 332

9-4
Error message
Error code Error message Description
Remedy
1033 [W Head Temp Rising]
The temperature of white
head A is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
1034 [W Head Temp Rising]
The temperature of white
head B is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
1060 [Temp Low]
The ambient temperature is
lower than the scope covered
by its warranty for the best
print result.
Raise your room temperature.
1061 [Temp High]
The ambient temperature is
higher than the scope
covered by its warranty for
the best print result.
Lower your room temperature.
1064 [Humidity too Low]
The humidity is lower than
the scope covered by its
warranty for the best print
result.
Turn on the humidification function and wait for
a while.
1065 [Humidity too High]
The humidity is higher than
the scope covered by its
warranty for the best print
result.
Lower your room humidity.
1070
[Battery Needs to Be
Replaced] It is time to replace the
battery on the main board. Note the error code and error message, and
notify your dealer.
1080 [Please Adjust RTC]
The built-in clock has not
been set up. Note the error code and error message, and
notify your dealer.
1085 [Please Adjust RTC]
The built-in clock has not
been set up. Note the error code and error message, and
notify your dealer.
1090
[Clean nozzle guard and
cap] The cap needs to be
cleaned. Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
1091
[Clean nozzle guard and
cap] The cap needs to be
cleaned. Select the [Clean nozzle guard and cap] menu
item to perform cleaning.
1210 [Exhaust Fan Stop]
The mist collection fan (right
side) is not working. Note the error code and error message, and
notify your dealer.
1211 [Exhaust Fan Stop]
The mist collection fan (left
side) is not working. Note the error code and error message, and
notify your dealer.
1300 [Replace cap foam]
The cap foam needs to be
replaced. Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
1301 [Replace cap foam]
The cap foam needs to be
replaced. Select the [Replace maintenance unit parts]
menu item and replace the cap foam.
1320 [Replace carriage foam]
The carriage foam needs to
be replaced. Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
1321 [Replace carriage foam]
The carriage foam needs to
be replaced. Select the [Replace maintenance unit parts]
menu item and replace the carriage foam.
1340 [Replace wiper]
The wiper needs to be
replaced. Select the [Replace maintenance unit parts]
menu item and replace the wiper.
1341 [Replace wiper]
The wiper needs to be
replaced. Select the [Replace maintenance unit parts]
menu item and replace the wiper.