Brother GT-341 Скачать руководство пользователя страница 120

Страница: 120 / 178

6. Maintenance

GT-3 Series

110

6-1-2. Replacing the Wiper Cleaner and Cleaning the Caps / Wipers

The Wiper Cleaner needs to be replaced regularly. Keep the Print Head Cap and Wiper Blade clean when

replacing the Wiper Cleaner. If not, the waste ink may drop on a T-shirt in printing or mis-firing may not be easily

improved.
(1) Select [ Maintenance ] from the menu by pressing Up/Down Buttons and press OK Button.

(2) Select [ Maintenance Parts Exchange ] and press OK Button. The Platen will be loaded and the Wipers will be

moved to the cleaning position. Follow the message and turn off the printer.

(3) Open the Front Cover with both hands until it is locked with the stopper.

0046Y

(4) Cover your right hand with a plastic bag so that you can hold the used Wiper Cleaner safe and clean. Pick the

right edge of the Wiper Cleaner and move slightly to the right (1-2 mm) by your right hand, the claw in the right

will be released.

0058Y

(5) Move the Wiper Cleaner slightly to the left (1-2 mm) to release the claw in the left. Pay attention not to tilt the

Wiper Cleaner or the waste ink may drop. Keep flat and move slowly.

<Note>

Do not tilt the Wiper Cleaner, ink may get on your hands or clothing.

0059Y

Содержание GT-341



















































































































































































Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды

Brother GT-341, Инструкция по эксплуатации

Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды