Brother GT-341 Скачать руководство пользователя страница 161

Страница: 161 / 178

GT-3 Series

7. Troubleshooting

151

(8) The Carriage moves to the position of the Flushing Plate. Follow the indication of the Display and turn OFF

the printer.

(9) Open the Front Cover with both hands until it is locked with the stopper.

(10) Take off the gloves and touch some metallic part to dissipate static electricity (e.g. Covers). Better to put on

the Wrist Strap.

(11) Remove the plastic cover on the Carriage PCB by referring to the step 11 and 12 in the page for Color.

(12) Pull out the black tabs at the both edges of Flat Cable of the Print Head to the back side of the printer, and

remove the Flat Cable (the following example:W2).

(13) Rotate the Lever to your side that fixes the Print Head. Move it to the direction of the arrow.

(14) Lean the Print Head forward to the inside of the Carriage (left), hold the Knob and pull up the Print Head and

remove it from the printer (right). Keep the surface of the Print Head (Nozzles) safe, do not touch to other

parts or the Print Head may be seriously damaged.

(15) Mount the new Print Head to the printer. Hold the knob of the Print Head with one hand (left), hold the Tube

with the other hand (middle) and move the Print Head to the mount position (right). Fix the Print Head by

following the steps (18) to (20) in Color Print Head operations.

<Note>



Move the Print Head by its upper part go through the Tube. It is easier to fix the Print Head on the

Carriage by leaning the Print Head backward and moving it from the upper left. Do not hit the surface of

the Print Head to the other parts or it may be seriously damaged.



Do not break or bend the Tubes.

Lever

Содержание GT-341



















































































































































































Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды

Brother GT-341, Инструкция по эксплуатации

Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды