Brother GT-341 Скачать руководство пользователя страница 141

Страница: 141 / 178

GT-3 Series

7. Troubleshooting

131

7. Troubleshooting

CAUTION

Ensure there is adequate space left for safe working. The Platen moves forward while operating and it

may be injured.

Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt tray

and the covers, it may be injured.

Do not move the Platen by hand.

The Printer may be seriously damaged by this.

Do not put your hands inside the covers while the printer’s power is turned on, otherwise your hands

may touch against moving parts and this may result in injury.

Wait at least 1 minute after turning off the power switch before opening the front cover.

Do not touch the head heat sink as it may be HOT and may cause a bum.

Be careful not to get your fingers caught when closing the front cover, otherwise it may result in injury

to your fingers.

Do not disassemble the ink cartridge.

Take care not to let the liquids: Ink, Wash Liquid, Maintenance Solution, Pretreatment or waste liquid

come into contact with your eyes or onto your skin, otherwise inflammation can result. In case of

contact with eyes, do not rub but immediately rinse the eyes with water.

Furthermore, do not drink the liquids: Ink, Wash Liquid, Maintenance Solution, Pretreatment or waste

liquid under any circumstances, as they can cause vomiting and diarrhea.

Keep the liquids out of the reach of children.

Содержание GT-341



















































































































































































Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды

Brother GT-341, Инструкция по эксплуатации

Результаты поиска

Содержание GT-341

Отзывы:

Похожие инструкции для GT-341

Бренды по названию

Популярные бренды