Brother 82-W20, Руководство по эксплуатации

Страница: 60 / 420

LOWER THREADING
58
f
Pass the thread through the thread guide.
a Thread guide
g
Pass the thread around the pre-tension disk
making sure that the thread is under the
pre-tension disk.
a Thread guide
b Pre-tension disk
h
Follow steps
g
through
k
on page 55
through 56.
■
Using the Spool Stand
To wind thread on the bobbin while the spool stand
is installed, pass the thread from the spool through
the thread guide on the telescopic thread guide, and
then wind the bobbin according to steps
e
through
k
of “Using the Supplemental Spool Pin”on
page 55 to page 56.
■
Untangling Thread from Beneath the
Bobbin Winder Seat
If the bobbin winding starts when the thread is not
passed through the pre-tension disk correctly, the
thread may become tangled beneath the bobbin
winder seat.
Wind off the thread according to the following
procedure.
a Thread
b
Bobbin winder seat
a
If the thread becomes tangled under the
bobbin winder seat, press once to
stop the bobbin winding.
Memo
• See page 24 to assemble the spool stand.
• See page 67 to thread the machine using
the spool stand.
CAUTION
• When winding thread on the bobbin, do not
cross the bobbin winding thread with the
upper thread in the thread guides.
CAUTION
• Do not remove the bobbin winder seat even if
the thread becomes tangled under the bobbin
winder seat. It may result in injuries.