Brother 82-W20, Руководство по эксплуатации

Страница: 266 / 420

CONFIRMING THE PATTERN POSITION
264
d
Use or to adjust the LED pointer so
that it indicates the actual needle drop
point.
e
Press twice to return to the original
screen.
■
Adjusting the Brightness of the LED
Pointer
a
Follow the steps from
a
to
d
to display
the embroidery foot with LED pointer
adjustment screen.
b
Use or to adjust the brightness of
the LED pointer.
c
Press twice to return to the original
screen.
Aligning the Embroidering
Position Using the Built-In
Camera
The camera built into this machine can be used to
easily align the embroidering position. This is
useful for patterns which need to be embroidered
in a particular position as shown below.
a
Use a chalk pencil to draw a cross at the
desired embroidering location.
a Chalk pencil mark
* Display the grid lines or cross grid lines in the
pattern display area to check the pattern orientation.
(Refer to “Changing the Embroidery Frame Display”
on page 306.)
b
Hoop the fabric.
c
Select the pattern on your sewing machine
and press .
Note
• The specified setting is saved in the
machine’s memory. This is useful for
positioning during continuous
embroidering.
• For normal use, return the setting to “00”.
Note
• When hooping the fabric in the embroidery frame,
make sure that the embroidery pattern will fit within
the embroidering area of the frame being used.
a
Embroidering area
b Embroidery pattern size
c
Chalk pencil mark