Brother 82-W20 Скачать руководство пользователя страница 59

Страница: 59 / 420

LOWER THREADING

etting

Re
ad

■

Using the Spool Pin

You can use the main spool pin to wind the bobbin
before sewing. You cannot use this spool pin to
wind the bobbin while sewing.

Turn the main power to ON and open the
top cover.

Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.

Groove in the bobbin

Spring on the shaft

Pivot the spool pin so that it angles upward.
Set the thread spool on the spool pin so that
the thread unwinds from the front of the
spool.

Spool pin

Spool cap

Thread spool

Spool felt

Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.

While holding the thread with both hands,
pull the thread up from under the thread
guide plate.

Thread guide plate

Memo

• When removing the bobbin, do not pull on

the bobbin winder seat. Doing so could
loosen or remove the bobbin winder seat,
and could result in damage to the machine.

CAUTION

• Setting the bobbin improperly may cause the

thread tension to loosen, breaking the needle
and possibly resulting in injury.

Содержание 82-W20





































































































































































































































































































































































































































Результаты поиска

Содержание 82-W20

Отзывы:

Похожие инструкции для 82-W20

Бренды по названию

Популярные бренды

Brother 82-W20, Руководство по эксплуатации

Результаты поиска

Содержание 82-W20

Отзывы:

Похожие инструкции для 82-W20

Бренды по названию

Популярные бренды