50
Installation and Operation Manual
X-DPT-Profibus-DP-Interface-eng
PN 541-C-068-AAG
November, 2008
TRADEMARKS
Brooks ........................................................ Brooks Instrument, LLC
Buna ........................................................... DuPont Dow Elastomers
Kalrez ........................................................ DuPont Dow Elastomers
Teflon ............................................... E.I. DuPont de Nemours & Co.
Viton ............................................ DuPont Performance Elastomers
LIMITED WARRANTY
Seller warrants that the Goods manufactured by Seller will be free from defects in materials or workmanship under
normal use and service and that the Software will execute the programming instructions provided by Seller until the
expiration of the earlier of twelve (12) months from the date of initial installation or eighteen (18) months from the date of
shipment by Seller.
Products purchased by Seller from a third party for resale to Buyer (“Resale Products”) shall carry only the warranty
extended by the original manufacturer.
All replacements or repairs necessitated by inadequate preventive maintenance, or by normal wear and usage, or by
fault of Buyer, or by unsuitable power sources or by attack or deterioration under unsuitable environmental conditions, or
by abuse, accident, alteration, misuse, improper installation, modification, repair, storage or handling, or any other
cause not the fault of Seller are not covered by this limited warranty, and shall be at Buyer’s expense.
Goods repaired and parts replaced during the warranty period shall be in warranty for the remainder of the original
warranty period or ninety (90) days, whichever is longer. This limited warranty is the only warranty made by Seller and
can be amended only in a writing signed by an authorized representative of Seller.
BROOKS SERVICE AND SUPPORT
Brooks is committed to assuring all of our customers receive the ideal flow solution for their application, along with
outstanding service and support to back it up. We operate first class repair facilities located around the world to
provide rapid response and support. Each location utilizes primary standard calibration equipment to ensure accuracy
and reliability for repairs and recalibration. The primary standard calibration equipment to calibrate our flow products
is certified by our local Weights and Measures Authorities and traceable to the relevant International Standards.
Visit www.BrooksInstrument.com to locate the service location nearest to you.
START-UP SERVICE AND IN-SITU CALIBRATION
Brooks Instrument can provide start-up service prior to operation when required.
For some process applications, where ISO-9001 Quality Certification is important, it is mandatory to verify and/or
(re)calibrate the products periodically. In many cases this service can be provided under in-situ conditions, and the
results will be traceable to the relevant international quality standards.
CUSTOMER SEMINARS AND TRAINING
Brooks Instrument can provide customer seminars and dedicated training to engineers, end users and maintenance
persons. Please contact your nearest sales representative for more details.
HELP DESK
In case you need technical assistance:
Americas
1-888-554-FLOW
Europe
+(31) 318 549 290 Within Netherlands
0318 549 290
Asia
+011-81-3-5633-7100
Due to Brooks Instrument's commitment to continuous improvement of our products, all specifications are subject to
change without notice.
