Broadcom BROADCOM HT1000, Руководство пользователя

Страница: 56 / 180

BC4000 Series RAID Controllers User Manual
02/13/06
B ro ad c om C o r p or at i on
Page 42 Creating a Bootable Floppy Disk Document BC4000-UM100-R
C
REATING A
B
OOTABLE
F
LOPPY
D
ISK
You must create a bootable floppy disk if you are:
•
Updating the firmware
•
Upgrading your license level from the command line before installing your operating system
To create a DOS-bootable floppy disk:
1. At a computer running Windows and having both a floppy disk drive and a CD-ROM drive, insert a spare floppy
disk.
2. Do one of the following depending on which version of Windows you are using:
•
On a Windows 98 operating system, go to the MS-DOS command prompt and type:
format a: /s
Or
•
On a Windows 2000 operating system, perform the following steps.
a. Insert the Windows 2000 CD into the CD-ROM drive.
b. At the command prompt, change to the CD-ROM drive by typing:
x:
where x: is the drive letter of your CD-ROM drive.
c. At the command prompt, type the following.
cd \Valueadd\3rdparty\CA_Antiv
d. At the command prompt, type the following.
makedisk
Or
•
On a Windows XP operating system, do the following:
a. In My Computer , right-click drive A and click Format .
b. In Format options , click the Create an MS-DOS startup disk option, and then click Start .
Or
•
On a Windows 2003 system, in the My Computer window, right-click drive A, and then click Format .
Note: Formatting the disk overwrites any data that may be stored on the disk. This means you should
not format a disk that contains files you do not want to lose.