Briot emotion, Руководство по эксплуатации

Страница: 150 / 210

Maintenance... Preventive maintenance
5-149
5.9 PREVENTIVE MAINTENANCE
5.9.1 H
INTS
>
You will optimize the working life of your edger by using only Briot spare parts.
> Change the blocks regularly - every 100 lenses.
5.9.2 R
EPLACEMENT TABLE FOR STANDARD PARTS
The following table summarizes the replacement frequency for standard parts, calculated according to the number
of lenses edged.
T
ABLE
1: R
EPLACEMENT OF STANDARD PARTS
Part Briot Part Number
Number
of lenses edged
Briot block - Large Size
(25 mm diameter) 21 53 012 Every 100 lenses.
Briot block - Small Size
(19 mm diameter) 21 53 013 Every 100 lenses.
Briot block - 17 across flats 11 53 034 Every 100 lenses.
Flexiible lens clamp adaptor pad - Large
size 11 38 162 Every 1000 lenses.
Flexible lens clamp adaptor pad - Small
Size 11 38 161 Every 1000 lenses.
Flexible lens clamp adaptor pad - 17 across
flats 11 38 171 Every 1000 lenses.
Removable lens feeler tip 11 38 201 Every 3000 lenses.
Lens holder adaptor - Large Size 11 90 375 If necessary
Lens holder adaptor - Small Size 11 90 406 If necessary
Lens holder adaptor - 17 across flats 11 90 522 If necessary
Mineral roughing wheel
Replaced by a Briot technician only
15 47 117 Every 10000 lenses.
TPT wheel
Replaced by a Briot technician only
15 47 131 Every 50000 lenses.
Finishing wheel
Replaced by a Briot technician only
15 77 411 Every 8000 lenses.
Polishing wheel
Replaced by a Briot technician only
15 77 415 Every 6000 lenses.
Safety-Bevel wheel
Replaced by a Briot technician only
16 06 207 Every 50000 lenses, per
wheel side
Grooving wheel
Replaced by a Briot technician only
16 06 304 Every 5000 lenses.
Mill bit 14 06 504 1 hr of total drilling
Emptying the settling tank (if closed circuit
operation)
Cleaning of tanks and filters - Every 500 lenses.
Visor 11 97 050 If necessary
Filter seal 20x27 21 62 153 If necessary