Bravi Platforms Sprint LUI MINI P.A., Руководство пользователя

Страница: 14 / 39

General Information
Before activating the machine by way of the commands on the ground or
those on the platform, it is necessary to satisfy the following command condi-
tions:
•
Platform Command Panel : the key switch must be set to the
Platform Command Mode “1” or Ground Command Mode “2”.
•
Ground Command Station - Platform Command Station: the emergen-
cy stop buttons must be in RESET position (POWER SUPPLY CON-
NECTED).
Key switch platform/switch off/ground
•
Central Position "0":
Rotate into this position to turn the machine off after use.
•
Position “1”:
(platform battery gauge will light up only for LUI PKI). In this posi-
tion, the machine can be actuated from the Platform Command Sta-
tion.
•
Position “2”:
(platform battery gauge will show GRD only for LUI PKI). In this
position, the machine can be actuated from the Ground Command
Station.
Platform Emergency Stop Button
Pushed immediately stop all the operational phases of the machine.
Reset DOES NOT actuate the machine, but enable the command devices
NOTE:
For manoeuvring the machine it is necessary that the emergency stop but-
tons on the ground command station and on the platform need to be turned to
the RESET position.
Left and Right sensor for activating the functions
Left and Right hand must be placed on the handles, in front of the sensor to
allow the activation of the driving/raise/lower functions of the machine.
NOTE: Remember to activate, besides the left and right hand sensors, also
both the foot switches, so as to enable all the machine functions: driving/
raising /lowering.
Throttle Handle
Grasp the handle in the right hand and
ROTATE the handle FORWARD (back of the
hand in the direction opposite to the operator)
to activate the movement of the vehicle in
FORWARD GEAR. The release of the handle
AUTOMATICALLY stop
the machine.
.
ROTATE the handle BACKWARD (back of the
hand in direction of the operator) to activate the
movement of the vehicle in REVERSE GEAR.
The release of the handle AUTOMATICALLY
stop the machine.
.
Operation of the platform is exclusively limited to personnel who have been pre-
viously trained and authorised and who have thoroughly read and understand
the safety indications of this manual.
DRIVE ONLY ON A SMOOTH, SOLID AND HORIZONTAL SURFACE that is clean,
free of holes and of a suitable consistency, able to support the weight of the
machine and the weight of what the vehicle can transport. (See Section 5 Ma-
chine Technical Specifications)
ATTENTION
26
27
SECTION 3.
OPERATION OF THE MACHINE
FORWARD
BACKWARD