![background image](http://html1.mh-extra.com/html/bravi-platforms/sprint-lui-mini-p-a/sprint-lui-mini-p-a_manual_2805639004.webp)
1
.3 OPERATION
General information
•
Use the machine exclusively for transport of personnel with
respective tools and equipment for the manual handling of
stock items.
•
Do not operate a broken machine. If a malfunction occurs,
turn off the machine.
•
Do not suddenly shift the switches or command levers from
one position to the next passing through the neutral position.
Always bring the switch to the neutral position before shifting
it to the position corresponding to the next function. Actuate
the commands using a slow and uniform pressure.
•
If there are persons on the platform, allow personnel to re-
lease or activate the machine from the ground only in case
of emergency.
•
Make sure that electrical tools are put away properly avoid-
ing their being left hanging by their power cords in the plat-
form work area.
•
Before leaving the machine unattended, completely lower
the basket and switch off the machine. Remove the key to
prevent unauthorised use of the machine.
•
Transport of passengers on the machine is forbidden.
•
During operation, only the operator is permitted to be pre-
sent on the machine.
•
The battery fluid is extremely corrosive. Make sure that it
does not come into contact with the skin or clothing.
•
Charge the batteries in a well ventilated area.
SECTION 1.
SAFETY PRECAUTIONS
1
.4 RISK OF FALLING
•
Before using the machine, make sure that all of the safety
railings and gates are attached in their correct positions.
•
Keep both feet firmly planted on the floor of the platform.
•
Do not set ladders, boxes, steps, boards or other similar
articles on the platform floor in order to increase the range
of action of the same.
•
Do not use the lifting group to climb up onto the platform
nor for climbing down from it.
•
Pay very close attention when getting onto the platform or
when getting off of it. Make sure that the lifting group is
completely lowered. When getting onto the platform or
when getting off of it, do so facing the machine.
•
The operation of the commands, controls and safety sen-
sors, for LUI PKI, have been designed in such a manner
that the operator may always keep "four points of contact"
with the machine: Both hands and both feet MUST BE con-
tinuously in contact with the machine when it is in operation.
•
Always keep
“
three points of contact
”
with the machine,
doing so in such a manner that both hands and one foot or
else both feet and one hand are continuously in contact
with the machine when getting on or getting off of it.
6
7
Содержание Sprint LUI MINI P.A.
