Bravi Platforms Sprint LUI MINI P.A., Руководство пользователя

Страница: 9 / 39

2.5 BEFORE EVERY USE
•
Make sure that all of the manuals are in their weather resistant
manual box on board the machine.
•
Make sure that the tag with the serial number of the platform as
well as all of the adhesive safety stickers are in their place, and
that they are all perfectly integral and legible.
•
Inspect the machine in order to ascertain the absence of anoma-
lies, welding cracks, faults or malfunctions or any damage or
unauthorised changes to the machine, with respect to how it was
delivered by the manufacturer.
•
Check and verify the basket, the platform railings, check that the
entry gate functions properly and that it closes completely and
automatically.
•
Check the water level in the batteries and make sure that there
are no leaks. The battery cables must be correctly connected to
the terminals. There must not be any corrosion on them.
•
Check and verify by testing that all of the safety and personal
protection devices function properly.
•
Check and verify that the tires show no damage, abrasions or
deep cuts. Check and verify that there is no debris attached to
the wheels, tires or around them.
•
Visually inspect the hydraulic, electrical and mechanical compo-
nents. For each component make sure that all of its parts are
present, not loosened and fixed solidly in their respective posi-
tions and that there are no visible leaks, signs of excessive wear
or damaged areas.
•
Check and verify that there are no wires or cables that have
come loose and that hang from the underside of the vehicle.
•
Check and verify the correct operation of the key switch in the
basket.
•
Check and verify the operation of the emergency stop buttons:
those that are found on the command panel in the basket and
the one on the chassis control panel.
•
Check and verify, by testing, the proper operation of the manual
descending emergency lever.
2.6 FUNCTIONAL VERIFICATIONS
At the end of the “ complete inspection ”, carry out a functional verification of all
of the systems in an area that is free of super - elevated or ground level obsta-
cles.
For further indications on operation, consult Section 3 of this manual.
IF THE MACHINE DOES NOT FUNCTION PROPERLY, TURN IT OFF IM-
MEDIATELY.
NOTIFY THE PERSONNEL ASSIGNED TO MAINTENANCE OF THE
PROBLEM. DO NOT USE THE MACHINE UNTIL IT HAS BEEN DE-
CLARED SUITABLE FOR SAFE OPERATION.
Functional verification elements
1. From the ground command panel, without a load on the platform, per-
form the following operations:
a. Actuate the ground commands: the raising and the lowering of
the platform.
b. Make sure that all of the machine functions have been disabled
when the emergency stop button is activated (pressed).
c. Check and verify the proper function of the manual descending
emergency lever.
2. From the platform command panel, perform the following operations:
a. Raise and lower the platform from 0.61 to 0.92 several times.
Check and verify that the raising and the lowering of the platform come
about in a regular manner. Check and verify that with the raising of the
basket the driving is acti vated in automatic slow safety speed (only for
LUI PKI) or the brake release is deactivated (only for LUI MINI P.A.)
b. Actuate all of the functions and check and verify the correct
operation of all of the limit switches, the general emergency
switches and the actuation switches.
c. Vehicle brakes - (only for LUI PKI) Drive the vehicle on an slope
(not exceeding its nominal operational capacity on the grade)
then stop it, so as to make sure that the brakes will hold on an
incline.
WARNING
16 17
SECTION 2.
PREPARATION AND INSPECTION