![background image](http://html1.mh-extra.com/html/bravi-platforms/sprint-lui-mini-p-a/sprint-lui-mini-p-a_manual_2805639024.webp)
SECTION 4. EMERGENCY PROCEDURES
4.1 EMERGENCY FUNCTIONS
Operator not capable of controlling the machine
CONDITION IN WHICH THE OPERATOR OF THE PLATFORM IS
IMMOBILISED, TRAPPED OR UNABLE TO ACTIVATE OR CONTROL
THE MACHINE.
1.
Other personnel must actuate the machine from the ground
command panel only in the event of necessity.
2.
The platform commands may be utilised only by qualified per-
sonnel present on the platform itself.
STOP WORK WITH THE MACHINE IF THE COMMAND CON-
TROLS DO NOT FUNCTION PROPERLY.
3.
The recovery equipment may be used to have the occupant of
the platform descend from it. It is possible to use cranes or fork
lift trucks to stabilise the movement of the machine.
Platform locked in elevated position
If the platform locks up or is stuck in elevated structures or equipment,
transfer the people aboard into a safe location before moving the ma-
chine.
SECTION 5. GENERAL TECHNICAL SPECIFI-
CATIONS AND OPERATOR MAINTENANCE
5.1 INTRODUCTION
This section of the manual provides further information necessary
for the operator so that he or she may tend to the proper operation
of the machine and relative maintenance.
Maintenance operations and procedures must be performed by
qualified personnel:
-
Who have read and perfectly understood the safety indications in
the front of this manual (See PART 2)
-
Who possess personal safety equipment and use it as needed.
-
and with the machine at a zero energy condition( key switch
turned to zero and main red connector under the front cover discon-
nected)
Any procedure not found below is to be considered extraordinary
maintenance. Repairs, modifications and extraordinary mainte-
nance may not be performed without previous consultation with the
manufacturer, who according to the case, will provide written au-
thorisation to proceed or will suggest the involvement of one of its
own service technicians. These precautions are due to the fact that
faulty or incorrect procedures may cause anomalous operational
conditions, damage for the platform and risks for personnel. All re-
sponsibility, as pertains to such operations, is therefore declined.
Before putting the machine back into service, check and verify the
entire system in accordance with the start up procedures. Lack of
observance of these precautions may cause harm to persons and
damage to the machine.
In this section, the part relative to maintenance contains information
aimed at assisting the machine operator only in the performance of
daily maintenance procedures. Therefore, this part does not substi-
tute the more in depth preventative maintenance and inspection
program contained in the maintenance and procedure manual re-
served exclusively for specialised technicians.
46
47
Содержание Sprint LUI MINI P.A.
