Bravi Platforms Sprint LUI MINI P.A., Руководство пользователя

Страница: 16 / 39

1.
Push and hold the selector toward the Right , to activate the
direction to the right. Release the selector if only backwards
and forwards movement is desired.
a. Activating the throttle handle in FORWARD GEAR ,
the machine will move forward, turning to the right
(the front of the vehicle toward the right of the opera-
tor)
b. Activating the throttle handle in REVERSE GEAR ,
the machine will move backward, turning to the right
(the front of the vehicle toward the right of the opera-
tor)
2. Push and hold the selector toward the Left , to activate the
direction to the left. Release the selector if only backwards
and forwards movement is desired.
a. Activating the throttle handle in FORWARD GEAR ,
the machine will move forward, turning to the left (the
front of the vehicle toward the left of the operator)
b. Activating the throttle handle in REVERSE GEAR ,
the machine will move backward, turning to the left
(the front of the vehicle toward the left of the opera-
tor)
NOTE : THE STEERING ROCKER SWITCH AND THE THROTTLE
HANDLE MUST BE ACTIVATED AT THE SAME TIME IN ORDER
FOR THE VEHICLE TO MOVE IN THE DIRECTION SELECTED.
FOR THE MOVEMENT OF THE MACHINE FORWARD/
BACKWARD IN A STRAIGHT LINE, POSITION THE VEHICLE IN
THE DIRECTION DESIRED AND MOVE BACKWARDS OR FOR-
WARDS ONLY ACTIVATING THE THROTTLE HANDLE.
Footswitches
DO NOT PLACE THE FOOT ON THE FOOT SWITCHES BEFORE
TURNING THE KEY SELECTOR FROM “0” TO “1” OR “2”
ACTIVATION OF COMMANDS DIFFERENT FROM THE KEY SWITCH
TURN ON / TURN OFF OR THE RESET OF THE EMERGENCY STOP
SWITCHES DURING THE START UP OF THE VEHICLE WILL CAUSE
THE DISPLAY OF AN ERROR.
In the cage there are two foot switches, activated with the heels, which
guarantee the stable positioning of the operator without limiting his or her
comfort.
Removing one foot from one of the two switches, all of the functions of
the machine, raising, lowering and running, are disabled immediately.
Standard installation of alarmed gates. The latter restrict all the functions
of the machine in case of opening the gates while using it.
NOTE: Remember to activate, besides both of the footswitches also the
left and right hand sensors, (Section 3.6), so as to enable all of the ma-
chine functions: driving/raising /lowering.
Slope Alarm
LUI PKI INCLUDES A SLOPE ALARM .
IF THIS ALARM IS ACTIVATED AN ACOUSTIC SIGNAL IS EMITTED
AND IT IS NOT POSSIBLE TO RISE AND OR DRIVE THE PLAT-
FORM. THE TILT CONDITION REMAIN UNTIL THE PLATFORM IS
NOT COMPLETELY LOWERED AND THE SLOPE CONDITION HAS
BEEN ELIMINATED.
30 31
SECTION 3.
OPERATION OF THE MACHINE