105
EN
Mitho
Alarms
Functions
Alarms
Alarm log
Alarms
Logic operation
"Malfunctions/Alarms"
KNX scenes
Energy data
Burglar
alarm
Loads
control
Flood
alarm
Wind
threshold
Water
threshold
Flood alarm
Flood alarm
Flood alarm
Irrigation
Alarms
THE FUNCTIONS MENU
From the main page of the "Functions" menu select the
"Alarms" button .
Via this function it is possible to receive visual and
acoustic alarm warnings if certain events connected to
the result (True) of logical operations occur .
Add a new "Alarm"
Press button
and, on the keyboard that will appear,
key in a name to assign to the alarm; press the "enter"
button and choose from the window that will appear
the logic that determines the "Alarm" has occurred .
At the end of the operation you return to the main
page where the list of programmed alarms and their
status is shown:
Alarm not enabled
Alarm enabled
Alarm in progress
When an enabled alarm goes off, the alarm symbol
on the white strip flashes, the "Functions" icon on the
home page and the "Alarms" icon on "Functions" flash
with the alarm signal . By pressing the button that rep-
resents the alarm any acoustic signal is silenced and the
band stops flashing; icon remains active, however,
as long as the alarm condition persists .
Press button and select one of the alarms to delete
it from the list .
Press button and select the alarms for which an
associated acoustic signal is not required .
Press button
to access the historic list of the alarms
that have affected the system .
Press button and select one of the alarms to delete
it from the list .
Press button
to delete the whole list of alarms .
Note: The melody, rings and volume of the ringtone associ-
ated to all the alarms is managed from the "Setup" menu.
The acoustic signal is repeated every minute until it is
silenced or the alarm condition ends.
