79
EN
Mitho
Dimmer Living room
Priority
Block
33%
THE ROOMS MENU
"Lighting" Control
Select the "Zone" and "Room" inside which the device
to be controlled is contained
(see: “Navigation in the
“Rooms” menu” on page 72).
Brief pressure on the button turns the light point on
or off .
Light point off
Light point on
There are three possible types of light point:
ON/OFF light point
off
ON/OFF light point on
Dimmer light point
off
Dimmer light point on
If the system's configuration allows it, the percentage
of lighting on can be read on the button .
RGB light point
off
RGB light point
on
Prolonged pressure on the device to be controlled
opens a pop-up window with all the available options .
Possible options to adjust
ON/OFF lights and dimmed lights
Buttons
1
, enable the light point to be turned off (0%)
or on (100%) .
Buttons
B
, enable the light point to be turned off
(-) or on (+) progressively; button enables the pro-
gressive switching on/off to be halted at the desired
percentage .
Living Area
Dining Room
Living Area
Dining Room
Dimmer
Living room
0%
Dimmer
Living room
100%
Hallway
lighting
Hallway
lighting
RGB
Living room
RGB
Living room
It is also possible to set the percentage the light point is dimmed, on the central cursor: in the upper part of the bar
the value set is displayed . The bar goes white when the value set is reached .
Priority/over-riding a light point
If necessary it is possible to force the light point so that it is always on or always off: in this case the commands from
other devices, timers, scenarios are ignored until removal of the over-ride .
No over-ride active
Over-ride of light off
Over-ride of light on
1
B
