95
EN
Mitho
THE FUNCTIONS MENU
Irrigation
Hedge
Hedge
Sprinklers list
Hedge
Sprinklers list
mon
tue
wed
thu
fri
sat
sun
Irrigation
device Block 1A
Irrigation
device Block 1B
Irrigation
device Block 1A
Irrigation
device Block 2A
Irrigation
device Block 2B
Irrigation
device Block 1A
Setting the time and days of activation of an
irrigation scenario
Press button
1
; set the time at which you want the
irrigation cycle to be activated and confirm with
.
Use the pen provided to activate the days of the week
on which the irrigation cycle is to be run .
2
3
1
4
Forced activation of an irrigation cycle
The irrigation cycles are programmed to run at pre-set times of day . If necessary, you can force the daily cycle to
run by pressing button
2
.
Variation of the percentage of seasonal irrigation
If the weather conditions require a reduction or an increase in the percentage of irrigation automatically calculated,
press button
3
; key in the variation value (-90% . . . +400%) of the pre-set value .
Press “
enter
” to confirm the data entered . The program will re-calculate the irrigation cycles and therefore the time
the irrigation scenario ends so as to fulfil the request .
Adding/Programming single irrigation
devices
Each irrigation cycle controls the activation of a series
of irrigation devices .
To programme the single irrigation devices, press
button
4
.
If the list is empty, it is necessary to press button
and then choose from the list of irrigation devices that
are actually present on the system the one(s) to be part
of the cycle .
