71
EN
Access to the screen that allows you to
navigate between the “Zones”, the relative
“Rooms” and the “Functions”
Access to the "Functions" not associated
to a particular room: “KNX Scenes”, Burglar
alarm, “Irrigation”, "Energy data”, "Loads
Control” and “Alarms” .
Access to programming of the “Timers”,
“Sequences”, “Logics”, “Audio messages”,
“Screen Saver” and “Alarm clock” .
In the central area of the Home Page up
to three KNX Scenes or Sequences can
be activated . In order to activate these
functionalities, it is necessary to access the
relative items in the "Setup" menu .
If the icon and the word "Favourite" is
displayed, it means that no element has
been associated to this button yet; in this
case, by pressing on it, the page of the
"Setup" menu relating to the selection
of the "Favourites" function is loaded .
Once a particular function is defined as
a "Favourite", the icon and the name of
the function are updated accordingly on
the Home Page (the colour of the button
remains the same) . Via the "Setup" menu it
is always possible to change the function
set as a "Favourite" .
Access to the panel's general settings
Mitho
GENERAL INFORMATION
Main functions associated with the icons on the main screen
The main screen provides fast, intuitive access to the functions managed by the control panel . It also provides
immediate feedback on events involving the system .
Alarm clock activation
Alarm clock on
Alarm clock off
Rooms
Favourite 1
Functions
Favourite 2
Programs
Setup
Note:
After 5 minutes of
inactivity
on any screen, the terminal will automatically return to the opening screen, and the screen
brightness will be reduced (according to the setup settings), or to the screen saver (if activated).
No BUS line
Touchscreen lock for screen
cleaning (30 s)
