86
EN
Mitho
Single bedroom Thermostat
HVAC Master with setpoint control and non-
active profile
Press button to deactivate the automatic profile .
Set the setpoint of the thermostat controlled via the
cursor that appears . The side arrows let you fine-tune
the value of the temperature set in tenths of a degree .
The changes carried out to the current setpoint will be
effective until the setpoint is changed or an automatic
profile is activated .
Reference temperature regulation (Comfort,
Stand-by, Eco)
The temperature/hours diagram gives three reference
values called Comfort, Stand-by and Eco on the tem-
perature axis .
Default settings are:
Heating
Cooling
Comfort
20°C
24°C
Stand-by
16°C
28°C
Eco
18°C
26°C
To change these values press button
to select the parameter to change
“Comfort” -
“Stand-by” -
“Economy”
and key in the new temperature value on the keyboard
that appears .
Note:
The value which can be assigned to each temperature
range is limited by the values of the next highest and next
lowest range. For example, if range
corresponds to 20
°C and range
corresponds to 16 °C, the value of range
may be between16.1 °C and 19.9 °C.
Anti-freeze temperature regulation
Default settings cause the heating system to ensure a
minimum ambient temperature of 5 .0°C to protect the
system’s pipes from freezing . This minimum temperature
is also ensured even when the thermostat is deactivated .
(
“Off”) .
To change the anti-freeze temperature press the but-
ton
and key in the new temperature value .
Set parameters (Programmable thermostat)
Insert temperature in range [18,40]
enter
Single bedroom Thermostat
DIFF
DIFF1
DIFF2
DIFF3
Single bedroom Thermostat
mon
Comf
Stby:
Eco
tue
wed
thu
fri
sat
sun
THE ROOMS MENU
