69
EN
Access to the screen that allows you to
navigate between the “Zones”, the relative
“Rooms” and the “Functions”
Access to the "Functions" not associated to a
particular room: “KNX Scenes”, Burglar alarm,
“Irrigation”, "Energy data”, "Loads Control” and
“Alarms” .
Access to programming of the “Timers”,
“Sequences”, “Logics”, “Audio messages”, “Screen
Saver” and “Alarm clock” .
Access to the video entry system functions
The flashing icon indicates the presence of unread
messages from the porter or video entry systems
If the icon and the word "Favourites" is
displayed, it means that no element has been
associated to this button yet; in this case, by
pressing on it, the page for the "Setup" menu
relating to the selection of the "Favourites"
function is loaded . Once a particular function
is defined as a "Favourite", the icon and the
name of the function are updated accordingly
on the Home Page (the colour of the button
remains the same) . Via the "Setup" menu it is
always possible to change the function set as
a "Favourite" .
Access to the panel's general settings
Stair lighting
Auxiliary command
Where there is a porter switchboard
(Building function active), the icon
becomes
Porter Call
Door lock release
Video entry panel surveillance
camera activation
Ring disabling (Privacy)
Press the button to activate/deactivate
ring. The yellow button indicates that
the function is on
Video entry system voice mail
Press the button to activate/deactivate
voice mail.
The yellow button indicates that voice
mail is on
Mitho
Main functions associated with the icons on the main screen
The main screen provides fast, intuitive access to the functions managed by the control panel . It also provides
immediate feedback on events involving the system .
Main menu for systems
without
Porter Switchboard
Touchscreen lock for screen
cleaning (30 s)
Alarm clock activation
Alarm clock on
Alarm clock off
Rooms
Door entry
Functions
Favourites
Programs
Setup
GENERAL INFORMATION
Note:
After 5 minutes of
inactivity
on any screen, the terminal will automatically return to the opening screen, and the screen
brightness will be reduced (according to the setup settings), or to the screen saver (if activated).
No BUS line
