102
EN
Mitho
Loads control
Power profile
Loads control
Power profile
mon
tue
wed
thu
fri
sat
sun
To copy a "Power profile" to other days of the week,
select the day of the week whose profile you want to
copy and then select button
.
Select the day or days of the week to which you want to
copy the profile and press
to make the copy .
Setting "Power profile" parameters
Press button
to access the "Power Profile setup
options .
Pressing on each of the buttons
1
activates the key-
board for setting the 5 values that make up the power
profile displayed in the diagram .
By pressing on icon
2
it is possible to enable/disable
the priority of manual control compared to the auto-
matic disconnecting of the loads carried out by the
device . If the function is enabled (blue icon), the device
ignores the fact that the power load, which according
to the function's control logic should be disabled, has
been enabled manually, for example from a different
"Loads management" section
From the main page "Loads control" select the button
"Loads management" to display the four daily time slots
based on which it is possible to set the function, the
priorities, the loads managed and the order of discon-
nection and reconnection .
Note: the day displayed in the profile appears in blue, the
current day is shown by the white strip.
control point . By disabling this function, the panel once again takes action to disconnect the power load should it
be manually enabled .
Pressing on icon
3
activates the keyboard for setting the minimum consumption value beyond the threshold set . Once
the threshold is exceeded the panel will immediately check if there are power loads programmed for disconnection .
Pressing icon
4
activates the profile created or changed (the white strip appears on the buttons "Power profile"
and "Loads management") .
Note: When the profile is active no change can be made to the parameters or to the profile itself.
THE FUNCTIONS MENU
1
2
3
4
Loads control
Power
profile
Loads
management
