manualshive.com logo in svg

BOXER 700HDX, Руководство оператора

Поделиться
Скачать
BOXER 700HDX Скачать руководство пользователя страница 39

Pre Start Inspection and Operation

3.13

Figure 3-14 Travel Chains and Binders

Lifting Procedures

When it becomes necessary to lift the machine

1. Use a lifting device that can safely lift 4,000 lbs (1820 Kg).
2. Use appropriate lifting chains (Item 1, 

Figure 3–15

) that can safely lift 4,000 lbs 

(1820 Kg).

3. Route the chains through the lifting eyes (Item 2, 

Figure 3–15

) located at the top 

of the boom arms.

4. Make sure that the length of chain on each side of the lifting point is the same 

(Item 3 A, 

Figure 3–15)

 is the same as (Item 3 B, 

Figure 3–15

) so that the machine 

is lifted straight upwards. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

•  Lift the machine approximately 12” to make sure that the machine is balanced 

before completing the lift.

•  If lifting the machine with an attachment installed, the overall machine may not 

be balanced from front to back.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3-15 Machine Lifting

CAUTION

1

2

2

3

A

3

B

1

2

Содержание 700HDX





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды