BOXER 700HDX, Руководство оператора

Страница: 27 / 92

3.1
Section 3 - Pre-Start Inspection and Operation
IMPROPER USE OF THE COMPACT UTILITY LOADER COULD CAUSE DEATH
OR SERIOUS INJURY. BEFORE OPERATING THE MACHINE OR PERFORMING
MAINTENANCE, THE OPERATOR MUST READ AND UNDERSTAND THE
ENTIRE OPERATOR’S MANUAL, REVIEW MACHINE CONTROLS, LOCATE
AND REVIEW ALL WARNINGS AND SAFETY PLACARDS, AND RELEVANT
OPERATOR SAFETY MATERIALS INCLUDING WRITTEN, VISUAL, VIDEO OR
VERBAL INSTRUCTIONS.
Pre-Start Inspection
It is very important to do a visual inspection of the machine before beginning operation. This
inspection should include:
• Check all decals and warning signs for damage.
• Check engine oil.
• Check and refill fuel tanks.
• Check hydraulic lines and hoses for signs of damage or leaks.
• Inspect the machine for any signs of damage or loose fasteners.
• Check fluid levels and any signs of leaking fluids.
• Do all Daily Service Checks.
• Check machine controls to make sure that they automatically return to the neutral
position.
The following information presents details on these inspection points and service checks
Daily Service Check and Start - Up Inspections
Service Cycle Table
DANGER
Activity Daily (10 Hours)
Fuel Check and fill
Engine Oil Check and fill if low
Engine Oil Filter Inspect for leaks
Engine Radiator Inspect add if necessary
Air Filter Check air filter dirt release
Fuel Filter Inspect for leaks
Battery Inspect terminals/leaks
Hydraulics
- Hydraulic Filter
- Hydraulic Fluid
- Hydraulic Hoses
Inspect for leaks
Check and fill if low
Inspect for leaks
Grease Check*
Track Damage Inspect
Visual Check for Loose/Missing Fasteners Inspect
Check and Adjust Track Tension Inspect
Check both Track Widening Stop Bolts Inspect
*Under very wet, muddy, dusty or dirty working conditions more frequent lubrication may be
required.