Bovie Aaron 1250, Руководство по обслуживанию, Страница: 48 / 68

How to Check the Bipolar Mode (with Footswitch)
1. Select the Bipolar mode by pressing the Bipolar Mode switch on the front panel.
Note: The unit automatically changes to Bipolar footswitching when you select the Bipolar mode.
2. Verify that the Bipolar Mode LED illuminates green, and that the system generates the Coag tone when you press
the Coag pedal (Blue) on the footswitch.
3. While activating the Bipolar mode, rotate the volume control over the full range to verify that the sound is audible
throughout the range.
4. Confirm that releasing the Coag pedal returns the unit to an idle state.
How to Check the Monopolar Mode (with Footswitch)
1. Select monopolar foot control by pressing the Footswitch Control Selector until the Monopolar Footswitch
Control Indicator illuminates.
2. Connect a single-plate patient return electrode to the Return Electrode receptacle of the unit. Verify that the green
single-plate patient return electrode indicator illuminates.
3. Press the Cut pedal on the footswitch. Verify that the Cut and Blend Activation Indicator illuminates and that the
system generates the Cut activation tone.
4. While activating the Cut mode, rotate the volume control over the full range to verify that the sound is audible
throughout the range.
5. Press the Coag pedal on the footswitch. Verify that the Coagulation, Fulguration, and Bipolar Activation Indicator
illuminates and that the system generates the Coagulation activation tone.
6. While activating the Coag mode, rotate the volume control over the full range to verify that the sound is audible
throughout the range.
How to Check the Monopolar Mode (with Handswitch)
1. Connect a handswitching handpiece to the Monopolar Handswitching receptacle.
2. Activate, one at a time, the Cut and Coag handswitching controls. Verify that each control causes the correct
indicator and tone to sound.
48 Bovie / Aaron Medical